Gentry Stinson Knotty Alder Floating Shelf | 24″ × 10″ × 3″ | Standard Mount | Unfinished | LED Light Ready

$348.00

The 24-inch length makes a focused two-foot display area for an entry, a reading corner or a small wall composition. Its 10-inch projection and 3-inch face give you clear dimensions to plan around nearby trim and furnishings.

Supplied unfinished and stain ready, this shelf lets you choose the final treatment for your room. Apply your chosen finish before putting the shelf into service.

Made in Phoenix with real Knotty Alder veneer over an engineered core and precision-mitered joints. The standard Stinson concealed mounting system supports the floating appearance.

Your exact shelf

Length: 24 inches
Depth: 10 inches
Thickness: 3 inches
Wood: Knotty Alder veneer over an engineered core
Finish: Unfinished / Stain Ready
Mounting: Standard Stinson concealed mount
Lighting: LED Light Ready — select one LED location
Quantity: One shelf; decorative objects excluded

This listing purchases the configuration above directly. Shipping is included within the contiguous United States. Install according to the Stinson mounting instructions and the requirements of your wall construction.

Living-room rendering. Natural wood grain and color vary. Refer to the listed dimensions for measurements; decorative objects are not included.

LED light-ready preparation included

The price includes the $89 LED Light Ready upgrade: one factory-machined channel, an aluminum channel and a diffuser lens. Choose one location using the LED Location selector: Top Front, Top Rear, Bottom Front or Bottom Rear.

LED tape, driver, dimmer/controller, wiring and electrical installation are supplied separately. Plan wiring and accessible driver placement before installation. Illuminated living-room renders show separately supplied LED tape installed in the selected channel location. LED tape and electrical components are not included in the $89 preparation upgrade.

Production & delivery

Made to order in Phoenix, Arizona. Current standard production is approximately one week after acceptance of a finalized order under normal production conditions, excluding weekends and company-observed holidays. Carrier transit time is additional. Larger quantities, material constraints and custom requirements can extend the schedule. See current production and shipping timing and the shipping policy.

Mounting & installation

The standard concealed Stinson mount creates the floating appearance. Have your installer verify wall construction and structural anchorage before installation. Load capacity depends on shelf dimensions, wall construction, anchorage and load distribution. Review the standard installation guide and load and installation guidelines before ordering.

Care

Use indoors in dry conditions. Apply your chosen finish before use and follow that finish manufacturer’s care instructions. Dust finished surfaces with a soft cloth. When needed, wipe gently with a lightly damp cloth and dry promptly. Avoid standing water, steam, abrasives and harsh solvents; protect the surface beneath planters and other damp objects.

Warranty & order terms

Review the five-year limited online product warranty for coverage and exclusions, and the order-change, cancellation and return terms for configured, made-to-order products.

LED Location: Top Front

Top Front Top Rear Bottom Front Bottom Rear

Gentry Stinson Knotty Alder Floating Shelf | 24″ × 10″ × 3″ | Standard Mount | Unfinished | LED Light Ready